七台河PD-06DT fully automatic single-head terminal dipping machine

PD-06DT fully automatic single-head terminal dipping machine is a series of actions for wire: cutting, peeling, twisting, single-head terminal, single-head dipping.

产品描述

Product description:

PD-06DT fully automatic single-head terminal dipping machine is a series of actions for wire: cutting, peeling, twisting, single-head terminal, single-head dipping. The machine adopts imported PLC system to control touch screen operation, which is easy to learn and understand. The servo motor is driven in conjunction with the imported ball screw to make the position of wire feeding, peeling, tipping, and tin dipping very accurate and fast, and the movement connection between them is smooth. , Long and short lines, etc. The tool holder, front and back peeling parts have been changed from the traditional gear structure to a modular design structure to avoid the problem of the accuracy of the tool holder due to the wear between machinery after a period of use. The screen input parameters do not require any manual adjustment. Realize automation. The tool post is driven by a servo motor for accuracy.

PD-06DT can process 6 lines at the same time for electronic wires, the speed can reach more than 8000 per hour, PLC programming control, all actions can be operated by touch screen, simple operation, data adjustment can change the length of stripping wire, cutting depth, and end Location, tin dipping time, etc., to save time for the adjuster, the automatic detection function of the machine can also effectively control the occurrence of defective products, so that it can be found and dealt with in time.

 

Parameter Description:

Model PD-06DT
Features Wire cut, single-ended stripping, double-ended stripping, single-ended crimping, single-ended twisted wire, single-ended tin
Power supply 220V / 50 / 60HZ single phase
Capacity More than 26 times / minute (6 wires are cut at the same time, the production capacity is about 9,000, and the production capacity varies according to the type and size of the wire)
Cutting length 25mm-800mm (special length can be customized, and the shortest cutting length varies according to the stripping size and the shape of the crimping terminal)
Twisted length 3mm — 8mm
Dipping depth 0.2mm -10mm
Crimping capacity 1.5-2 tons
Air pressure 5 ― 6 kgf (Need to use clean and dry air)
Detection device Low air pressure, abnormal motor, low temperature alarm, abnormal pressure terminal, etc.
Body size 650mm×850mm×1300mm
Body weight 400kg

 

pd

 

Machine characteristics:

1. The machine is controlled by an imported PLC system, and the touch screen operation is easy to learn and understand. Professional engineers write software, and the related time movements such as wire splitting, wire cutting, peeling, and tin dipping will be automatically adjusted and adjusted;

2. The range of production wire can be from AWG18 --- AWG30 Teflon, silicone PVC, double parallel line, wiring, etc., which has a wide range of practicality;

3. Twisting mode adopts two rubbing knife clamping methods, which can adjust the clamping of the semi-peel rubber to change the tightness of the twisting line, so that the twisting line is straight and flat;

4. The tin dipping angle of this machine is close to 90 degrees, so that the wire dipping degree is average (the spot dipping depth is accurate) and the tin dipping time can be set by itself, which is more convenient for workers to process different specifications of wire rods. Achieve the effect of semi-tinned tin;

5. A waste treatment device is installed at the cutting line and peeling position to avoid the phenomenon of cutting copper wire due to the waste material not falling off in time. The tin furnace part is designed with an automatic tin scraping device to prevent the surface of the tin from being oxidized tin debris while ensuring the surface tidy.