七台河PD-HT2.0-S automatic sheath wire crimping terminal machine

PD-HT2.0-S equipment is automatically completed for sheathed wires, shielded wires, power wires and other multi-core wires: positioning, peeling, pressing terminals, and closing wires.

产品描述

Machine introduction and characteristics:

PD-HT2.0-S equipment is automatically completed for sheathed wires, shielded wires, power wires and other multi-core wires: positioning, peeling, pressing terminals, and closing wires. The machine terminal adopts variable frequency motor and electronic control technology, which has low mechanical loss and is quiet and saves power. OTP card-type abrasive tools, simple debugging and strong versatility, the crimping terminal and the stripping part are independent, the stripping length can be adjusted, the processing range is large, and the core range is between 16-28.

 

Parameter introduction:

Product Name: Sheath wire crimping machine
Model: PD-HT2.0-S
Voltage: 220V   50-60HZ
Power: 1.5KW
Volume: 690X450X12000mm
Net weight: 118kg
Sheath peeling length: Standard machine sheath stripping 35MM (special length can be customized)
Pressure: 1.5-3T
Applicable wire: Shielded wire, sheathed wire, power wire, etc.
Applicable mold: OTP horizontal and vertical grinding tools
Capacity: 1007 24 # 11P wire 7000PCS / H (depending on the wire)

 

Product advantages:

1. Touch screen operation, easy to understand, processing pitch and wire pin number can be adjusted freely, and single terminal and continuous terminal mode can be realized.

2. The stripping action is driven by the motor to translate along the screw rod, with fast speed and high accuracy.

3. The terminal machine adopts ultra-quiet energy saving and environmental protection type, which is energy saving and environmentally friendly, low noise and low power consumption.

4. The device has an automatic gripping and positioning wire feeding and wire management device, which can automatically straighten and straighten the wire, which overcomes the problem that the previous inaccurate pay-off position caused excessive defective products. With automatic take-up function, the terminal automatically releases the wire after it is finished, which improves the efficiency and the production capacity is three times that of the traditional machine.

 

PD