NEWS CENTER

Pudong Automation tells you how to improve the service life of fully automatic wire terminal machines?

2020-02-12


First of all, for a newly purchased fully automatic wire terminal machine, if it is a novice operation, it is required that novices must understand the safe operating specifications of the fully automatic wire terminal machine to prevent unnecessary losses due to improper operation during the novice operation. At the same time, it is necessary to pay attention to the safety of operation when operating the automatic cable terminal machine. Safe operation Full automatic cable terminal machine guarantees the safety of operation.

If the machine is abnormal during the second operation, turn off the power first, and ask the mechanic to perform maintenance and debugging in a timely manner. Non-designated personnel are strictly forbidden to debug or disassemble the machine parts. When repairing and debugging, be sure to turn off the machine power to prevent safety problems during the repair process.

Third, after cleaning, the operator of the fully automatic wire terminal machine must clean the machine every day in order to remove debris and excess oil on the machine surface. When using the machine, if it is found that the stamping guide rail of the fully automatic wire terminal machine is not lubricated, we It can be lubricated with oil once every 1-2 hours. The filling hole is on the top of the automatic wiring terminal machine. Do not add too much oil each time. It is advisable to add 2-3 drops at the same time. At the same time, the automatic wiring terminal machine speed bearing must be filled with butter every week: Maintenance during such use is the most important.