NEWS CENTER

Introduction to welding automation equipment

2023-06-15


Welding automation equipment with the increase in product types and product quality requirements continue to improve, the higher the welding process requirements up, so many of the original products have manual welding welding automation equipment for the needs and requirements of more and more.

 

Automation equipment engineering application characteristics:

1, the workpiece in the station positioning: according to the actual situation of the demand side of the product, axial and circumferential direction are a pipe joint hole (or pipe joint) as a benchmark.

2、The loading and unloading of the workpiece (up and down line) is in manual mode, and the loading of the accessories is manual material management and automatic loading.

3、Welding is automatic, the welding gun makes multi-degree of freedom movement and the workpiece can make rotary movement to achieve the required position of the weld.

4、PLC (Programmable Logic Controller) is used to control the whole automatic production process, touch screen is used as the man-machine operation interface, and the cylinder and motor cooperate to execute the automatic action.

 

Introduction to tapping and drilling automation equipment

Modern production and life in the machine shell, equipment end face, nuts, flange, furniture parts and a variety of hardware with different specifications often need to process through-hole or blind hole parts of the inner side of the hole processing the internal thread, screw or tooth button process. This process is simple and tedious, and if a large number of workpieces need to be processed, it is even more difficult for the company to operate, and it is for the company to solve these problems.

Equipment action flow:

The sliding bearing ears come out of the vibrating plate ---- via the straight vibration into the station to be processed ---- via the cylinder to push the material to the tapping mould ------ tapping machine issued action tapping ----- tapping completed ---- sliding bearing ears via the next tapping product out of the tapping mould ---- after the conveyor belt into another vibration plate (if necessary may not use more than one vibration plate, tapping completed by the straight vibration to the assembly preparation The tapping is completed by a direct vibration to the assembly preparation area, provided that a squeeze tapping or oil dripping device is used instead of coolant. ------ The vibratory plate comes out to the preparation area for assembly. ---- Combined with the left side cover to the preparation area. ----- The sliding bearing is combined with the left side cover by a cylinder. ---- Automatic unloading. ---- Completes the cycle.

Simple machine control: the operator can control 4-5 machines at the same time with just one person after a simple familiarisation.

High efficiency: one automatic tapping machine can complete hundreds to thousands of workpieces in one hour depending on the size of the workpiece.