PRODUCT CENTER

+
  • 1(8).jpg

PD-HT2.0-S automatic sheath wire crimping terminal machine

1108326619190808576


Product Category


PD-HT2.0-S equipment is automatically completed for sheathed wires, shielded wires, power wires and other multi-core wires: positioning, peeling, pressing terminals, and closing wires.
Inquiry

Product Description

Machine introduction and characteristics:

PD-HT2.0-S equipment is automatically completed for sheathed wires, shielded wires, power wires and other multi-core wires: positioning, peeling, pressing terminals, and closing wires. The machine terminal adopts variable frequency motor and electronic control technology, which has low mechanical loss and is quiet and saves power. OTP card-type abrasive tools, simple debugging and strong versatility, the crimping terminal and the stripping part are independent, the stripping length can be adjusted, the processing range is large, and the core range is between 16-28.

 

Parameter introduction:

Product Name: Sheath wire crimping machine
Model: PD-HT2.0-S
Voltage: 220V   50-60HZ
Power: 1.5KW
Volume: 690X450X12000mm
Net weight: 118kg
Sheath peeling length: Standard machine sheath stripping 35MM (special length can be customized)
Pressure: 1.5-3T
Applicable wire: Shielded wire, sheathed wire, power wire, etc.
Applicable mold: OTP horizontal and vertical grinding tools
Capacity: 1007 24 # 11P wire 7000PCS / H (depending on the wire)

 

Product advantages:

1. Touch screen operation, easy to understand, processing pitch and wire pin number can be adjusted freely, and single terminal and continuous terminal mode can be realized.

2. The stripping action is driven by the motor to translate along the screw rod, with fast speed and high accuracy.

3. The terminal machine adopts ultra-quiet energy saving and environmental protection type, which is energy saving and environmentally friendly, low noise and low power consumption.

4. The device has an automatic gripping and positioning wire feeding and wire management device, which can automatically straighten and straighten the wire, which overcomes the problem that the previous inaccurate pay-off position caused excessive defective products. With automatic take-up function, the terminal automatically releases the wire after it is finished, which improves the efficiency and the production capacity is three times that of the traditional machine.

 

PD

Keys: Ultrasonic welding machine,Stripping machine

Related Products


Model:PD-180BXJ-S
Dimensions:L1270*W710*H1225
Weight:Approx. 350KG
Display:Bilingual version in English and Chinese
Power/Rated voltage:220V\2000W
Cutting Length (mm):1mm-99999.99mm
Stripping Length (mm):0.1-300mm

Model:PD-08ZX-S
Power source:AC 220V/50/60HZ Single Phase
Power:1500w
Function:Cutting, peeling, twisting, single-head tinning, double-head tinning of all kinds of electronic wire harnesses
Productivity:600-1200 cycles/hour, 8 wires can be cut at the same time for wire diameters above 26 wires. (Wire length varies, speed capacity depends on wire material)

Power supply power:6W  220VAC
Rotational speed:18 rpm
Turning method:Intermittent start, program controlled
Power supply power:6W  220VAC
Rotational speed:18 rpm