PRODUCT CENTER

+
  • 13.jpg
  • 2(3).jpg
  • 3(2).jpg

PD-08ZX full-automatic double-head tin dipping machine

1108326598798102528



PD-08ZX fully automatic tin dipping machine takes PLC and human-machine interface as the core control system. It can cut, peel, twist (optional) and dip tin for various electronic wiring harnesses such as silicone, Teflon, and PVC.
Inquiry

Product Description

Product description:

PD-08ZX fully automatic tin dipping machine takes PLC and human-machine interface as the core control system. It can cut, peel, twist (optional) and dip tin for various electronic wiring harnesses such as silicone, Teflon, and PVC. The four actions completely get rid of the difficulty of processing extremely thin wires, thick wires and extremely short wires in the traditional wire dipping machine. PD-08ZX fully automatic tin dipping machine adopts a new design. The tool holder part, front peeling part and rear peeling part have been changed from the traditional gear structure to a modular design structure to avoid mechanical wear after using for a period of time. As a result, the accuracy of the tool holder is reduced. The depth of the cutter only needs to be entered on the screen without any manual adjustment. Realize automation. The tool post is driven by a servo motor for accuracy. The screws, guide rails, bearings, and cylinders of the moving parts are imported brands. The PLC control system operates with a human-machine interface, which makes the machine stable, accurate, less susceptible to interference, and has more flexible upgrade space. The quality of the machine is stable and the noise is low, while ensuring The quality of the produced wire.

 

Parameter Description:

Model PD-08ZX
Power supply AC 220V / 50 / 60HZ single phase
Features Wire cut, single-ended stripping, double-ended stripping, single-ended twisted cable, double-ended twisted cable, single-ended tin, double-ended tin, half-strip
Capacity 1400-1700 cycles / hour per hour, wire diameter AWG18 # -AWG30 # can cut more than 8 wires simultaneously. (The length of the wire is different, the speed capacity depends on the wire)
Wire diameter 0.3MM—2.0MM (AWG32 #-AWG16 #) (special wire diameter can be customized)
Cutting length (residual part) 20-500mm (special length can be customized, cutting line length between 10mm-20mm is very short line type machine, machine clips, etc. need special non-standard accessories)
Stripping length Single line: 0.1 mm—8.0 mm
Twisted length 4.0 mm—8.0 mm
Dipping tin length 1mm—10mm
Air pressure 6kgf (requires clean and dry air)
Body size 650mm×850mm×1300mm
Body weight About 300kg

 

pd

 

pd

Effect

 

Machine characteristics:

1. Modular design, Chinese touch screen computer operation menu, any parameters such as cutting line length, stripping length, twisting line length, tin dipping depth, tin dipping time, etc. can be adjusted on the screen, easy to learn and easy to use, and it is easy to change the process and materials Time-saving and labor-saving make up for many problems such as the need for professional masters of traditional machines, difficulty in adjusting machines, and instability.

2.Efficient servo motor drive, high configuration, high output, high cost performance. The cutting and peeling part of the dipping machine is controlled by the module structure. The accuracy is much higher than that of the traditional gear belt control structure. Silk phenomenon.

3. The machine can achieve a semi-tinned tin effect that cannot be achieved manually. The tin-dipped tin is 90 °. The tin-dipped depth is accurate, the tin-dipped thickness is uniform, and the tin-dipped effect is perfect.

4. The whole machine parts are electroplated to ensure that it is not easy to rust. The parts are processed with high precision to ensure the accuracy of the wire. Fast, efficient processing of multiple wires at the same time.

5. The machine is equipped with a waste treatment device, which ensures that the machine is clean and free of waste, and at the same time, ensures that the waste will not affect the cutting and stripping effect because it is not dropped in time.

6. The tin furnace part is designed with an automatic tin scraping device, so that the surface where the tin is contaminated does not have oxidized tin shavings, and at the same time, the table is clean.

7, compact, compact design, excellent concept, small footprint.

8. The company provides training, installation, commissioning, maintenance and repair services.

Keys: Ultrasonic welding machine,Stripping machine

Related Products


Model:PD-180BXJ-S
Dimensions:L1270*W710*H1225
Weight:Approx. 350KG
Display:Bilingual version in English and Chinese
Power/Rated voltage:220V\2000W
Cutting Length (mm):1mm-99999.99mm
Stripping Length (mm):0.1-300mm

Model:PD-08ZX-S
Power source:AC 220V/50/60HZ Single Phase
Power:1500w
Function:Cutting, peeling, twisting, single-head tinning, double-head tinning of all kinds of electronic wire harnesses
Productivity:600-1200 cycles/hour, 8 wires can be cut at the same time for wire diameters above 26 wires. (Wire length varies, speed capacity depends on wire material)

Power supply power:6W  220VAC
Rotational speed:18 rpm
Turning method:Intermittent start, program controlled
Power supply power:6W  220VAC
Rotational speed:18 rpm